FlameTech owners Shaun Kristoff and Jason Mounsey beside a FlameTech Plumbing & Heating van

Furnace Repair in Cochrane

5.0· 100+ Google reviewsRed SealAlberta LicensedBBB Accredited

Furnace repair in Cochrane when the heat has gone out, when the furnace keeps locking itself out, or when it runs for hours and the back bedrooms still feel cold. We test the furnace to find what failed before we name a part. You get the price for the fix before any work starts.

Cochrane is in our service area, and we dispatch from both Calgary and Airdrie. Call and we'll tell you honestly when we can get there. If the indoor temperature is dropping fast, mention it, along with whether a space heater or fireplace is helping.

Natural gas in Cochrane comes through ATCO Gas and Pipelines. If you can smell gas, get out of the house and call ATCO or 911 from outside; that comes before any furnace booking. There's more on who to call further down this page.

We test it, explain it, then price it.
Alberta
Licensed gas fitters
Tested
Before a part is named
Priced
Before work starts
Licensed
and insured

Cochrane furnace not heating? Call 587-834-3668, describe what it's doing, and we'll tell you honestly when we can get there.

Call 587-834-3668
via Google

“Shaun arrived promptly and completed servicing my furnace and water heater.

In addition he installed a new humidifier.

Very professional, knowledgeable and personal service. Highly recommend FlameTech!”

Elaine Cunningham — verified Google review for FlameTech

Elaine Cunningham

Calgary · 1 year ago

Furnace repair in Cochrane: what each symptom points to

A symptom tells us which part of the furnace to test first. On its own it rarely names the failed part, which is why we check before we quote a repair.

Nothing happens when the thermostat calls

No click, no fan, no sound at all. Start with the thermostat, because a flat battery, the wrong mode or a thermostat on its way out can look exactly like a dead furnace. If the thermostat is calling properly, we move on to power at the unit, the door safety switch and the control board. Our posts on a furnace that won't turn on and a thermostat that might be failing cover what a homeowner can safely look at first.

It starts up, but the burners never light

You hear the small draft fan (the inducer) spin up, then no flame. The furnace has stopped somewhere between proving its venting and lighting the gas. The cause could be the inducer motor, a pressure switch that won't close, an intake or exhaust pipe that's blocked or iced, or a worn-out igniter. We test each of those separately, since a new igniter won't help a furnace that can't vent.

Water on the floor around the base

High-efficiency furnaces produce water when they burn gas, and it drains through a trap and a hose, either by gravity to the nearest drain or by a condensate pump. A split hose, a plugged trap or a pump that has stopped will leave water on the floor, and plenty of furnaces shut themselves off when that drain backs up. Our post on a furnace leaking water explains where it comes from.

Weak airflow, or a blower that's louder than it used to be

A choked filter is the cheapest explanation, so it gets ruled out first. Past that, we look at the blower motor, the electronics that drive it and a wheel that may be caked with dust. Our page on blower faults goes through the noises and what sits behind them.

A fuse or breaker that keeps going

When the control-board fuse blows or the breaker trips more than once, something in the furnace is drawing more current than it should. Fitting another fuse might bring the heat back for an hour or a week. The real repair is tracking down the short or the struggling motor. See a furnace fuse that keeps blowing for more.

A new smell when it fires

A dusty smell on the first cold morning of the season usually burns off. A sharp electrical or plastic smell that hangs around is worth a call, and our post on a burning plastic smell covers the likely sources. A gas smell is a different situation altogether; see the gas and CO section below.

It runs, but some rooms stay cold

If the furnace cycles normally and the main floor is comfortable while the room over the garage never catches up, the trouble may sit in the ductwork, the registers or the airflow balance. We check the furnace first, then tell you honestly whether the furnace is the problem at all. Our page on uneven heat and cold rooms has more on this.

Snow drifts and the pipes on the side of the house

Most high-efficiency furnaces draw in air and push out exhaust through two plastic pipes that leave the house through a wall or the roof. If a drift buries those openings, the furnace can't prove its venting and won't run.

What one manufacturer asks for

The installation manual for Lennox's EL297UHEK furnace tells installers to position the termination 12 inches above the average snow accumulation. That is one maker's rule for one model, and the installation manual for your own furnace is what governs it. It still shows why pipes that come out of a wall close to the ground can disappear in a heavy snowfall.

After a storm, have a look from outside

Check whether snow has drifted up to the pipe openings or whether frost has built up around them, and mention what you saw when you call. It points our testing straight at the venting. Please don't chip at ice on the pipes or change how they're set up; their length, slope and position are part of how the furnace was installed.

Gas smell, a CO alarm, or just no heat: who to call

These three can get mixed up in the moment, and only one of them is a furnace repair booking.

You smell gas

ATCO's Natural Gas 101 guide says to leave the area immediately, go to a neighbour's house and call ATCO, 911 or the fire department. The same guide says not to flip light switches or use your phone while you're still inside. ATCO Gas and Pipelines Ltd. is the company that delivers natural gas to Cochrane residents, as the Town's public notice confirms. For the warning signs, read our post on a furnace that smells like gas.

Your carbon monoxide alarm is going off

The Town of Cochrane's winter safety advice is direct: "If your detectors are in full alarm, evacuate your home and call 911." Do that first. Once the house has been declared safe, call us about the furnace and its venting.

No heat, no smell, no alarm

That one is ours. A cold house and a furnace that won't heat it is a repair call. Phone us and describe what happens after the thermostat asks for heat and whether any light on the furnace is blinking.

Repair, or replace, and what changes if it's a replacement

How old the furnace is matters, but it doesn't decide the question by itself.

When fixing it is the better spend

One failed part on a furnace with a sound heat exchanger, where that part is still made, is usually worth repairing. Flame sensors, igniters, control boards, inducer motors and pressure switches can usually be changed without disturbing the rest of the furnace.

When we'll bring up replacement

Some findings make a repair hard to recommend. Corrosion or cracks in the heat exchanger are the big one. A control or motor the maker no longer supplies is another, and so is a run of repeat repairs in one season. When we hit one of those, you get the repair quote and the replacement picture side by side, and the decision is yours. Our furnace installs run from $4,500 to $9,600 depending on the equipment and the house, and our furnace replacement page walks through a changeover.

Permits and gas work on a replacement

The Town's Safety Codes permit information sheet lists furnace replacement among the projects that need a permit, and its building permits page states: "A certified gas fitter is required to obtain a gas permit." On a FlameTech changeover, the gas side is handled by our Alberta-licensed gas fitters.

Sizing the new furnace

The right size for a new furnace depends on your house today, meaning its insulation, its windows, its air leakage and the design temperature used for this region. Copying the number from the old furnace's badge can carry an old mistake forward. If you're weighing a condensing model, our high-efficiency furnaces page explains them, and as an authorized AirEase dealer we also install AirEase furnaces.

Useful before we arrive

None of this means taking a panel off the furnace.

The rating label and the install date

If the label with the model and serial number is visible without removing anything, take a photo of it. Add the install date if you know it. A newer furnace may still have manufacturer parts coverage, so it's worth finding the paperwork.

The blinking light

Plenty of furnaces report a fault by blinking an LED you can see through a little viewing window. Record ten seconds of it on your phone. If there's a printed legend for the blink codes on the cabinet, photograph that too.

What's keeping the house warm

Tell us if a space heater, a fireplace or anything else is carrying the house for now, and roughly what the indoor temperature has dropped to.

Room to work

If the furnace room also holds storage, clearing a path and some space around the unit lets us get straight to the testing.

The filter

The Town of Cochrane's winter safety advice suggests replacing your furnace filter at least every 3 months. If your filter's maker or the furnace manual asks for more frequent changes, go with that. A badly plugged filter can be enough to make some furnaces overheat and shut down.

What to leave alone

Resist resetting it over and over, or flicking the power switch or breaker for one more try. Each shutdown is the furnace reacting to something, and forced restarts can clear the fault history we'd use to find it. Gas valves, gas lines and fittings are work for a licensed gas fitter.

Covering Cochrane

Where we go in town

We dispatch from both Calgary and Airdrie and take furnace calls across Cochrane, including Heritage Hills, Fireside, Riversong, Sunset Ridge and Riverview. If you're not sure your street is in our area, ask when you call.

Other work, in Cochrane and in Calgary

For water heaters, plumbing and the rest of what we handle in town, see plumbing and heating in Cochrane. If the furnace is in a Calgary house, the page you want is furnace repair in Calgary.

After you call about a Cochrane furnace

Simple, honest, on your schedule.

01

Describe what it's doing

Give us your address in Cochrane, the make on the cabinet, what it does when the thermostat calls and whether a light is blinking. You'll get a straight answer about our next opening.

02

Test start-up and the safety checks

We watch the furnace try to start and check each safety control it passes along the way: draft fan, pressure switch, ignition, flame sensing and the high-limit. If a safety control is shutting it down, we look for what it's reacting to.

03

You approve the fix and the price

You hear which part failed, how we'd fix it and the price, and the work starts only after you agree. If a part has to come in from a supplier, we book a second visit once it arrives.

04

Confirm heat at the registers

With the repair done, we let the furnace run from a cold start until the thermostat is satisfied and check that warm air is reaching the registers. Then we walk you through what we replaced.

Service Area

Where we cover Cochrane.

We dispatch to Cochrane from Calgary and Airdrie. Our Cochrane page covers the plumbing and heating work we do there.

Request Service

Get a free Cochrane furnace repair quote.

Tell us what's going on and our dispatch team will call you back with pricing and availability.

We call you back — urgent jobs, call us directlyWe never share or sell your info

Or call 587-834-3668 if it's urgent

When you're ready

Book a Red Seal plumber in Cochrane.

Free estimates and upfront pricing, from local technicians who treat your home like their own.

Free estimate · No service charge for quotes · BBB Accredited